 |
All Duralumin Adjust Pulley for RB |
 |
|
 |
| ・ |
Super lightweight duralumin made |
|
We applied super lightweight duralumin for the material of both pulley and gear part, and enabled to reduce its weight vastly.
STD weight: approx 550g / TOMEI: approx 40% lighter
|
・
|
Super high quality |
| Each part is produced using special technique to realize the super high quality. It promises firm and precise transmission of the drive from timing belt, and complete reduction of the noise. |
| ・ |
Super high strength |
| Surface of the pulley is coated by colored hard alumite (tough color) to raise the durability when contacting with timing belt.
This industry leading technology allowed the pulley to be used in the drag racing cars producing 1000hp over 10000rpm.
Needless to say, there is no timing shift caused by peeled off coating.
|
| ・ |
Specially designed IN and EX pulleys |
| We designed each IN and EX pulleys individually so that the scale of the each pulley comes to the top at TDC. Valve timing adjustment is no longer a complicated work anymore. |
| ・ |
Looks good under the hood |
| 100% made of duralumin with colored hard alumite coating shows the toughness of its functionally designed body. |
| ・ |
Easily adjustable scale |
| Since we applied simple but flexible scale considering actual use, urgent need of setting change can be easily fulfilled. |
Price：16,000yen / each IN No.：152009 EX No.：152010
|
|
 |
 |
| Application |
Product |
Part No. |
Price (JPY) |
RB26
|
PONCAM + ADJUST PULLEY
|
Cam No.+153027
|
89,000
|
|
PONCAM + ADJUST PULLEY
|
Cam No.+153027
|
89,000
|
| RB25 |
PROCAM（Lash） + ADJUST PULLEY
|
Cam No.+153027
|
85,000
|
|
PROCAM（Solid） + ADJUST PULLEY
|
Cam No.+153027
|
89,000
|
| RB20 |
PONCAM + ADJUST PULLEY
|
Cam No.+153027
|
85,000
|
|
PROCAM（Lash） + ADJUST PULLEY
|
Cam No.+153027
|
85,000
|
|
PROCAM（Solid） + ADJUST PULLEY
|
Cam No.+153027
|
89,000
|
|
|
|
|
|
2003／09／19 renewed
|
SS Suction KIT |
|
|
 |
|
By reducing intake resistance between air filter to the turbine, engine response and output are gained vastly.
We are offering 2types of kit for NISSAN Z32 air flow meter, and air flow-less intake. We applied SAMCO® silicone hose;
which is known for its highest heat resistance and durability, it provides stable amount of fresh air even under the high boost pressure.
Attached air funnel secures highest efficiency of air intake for the turbine to perform properly.
|
| ・ |
Air intake efficiency gains largely
（TOMEIØ80、STDØ65） |
 |
| ・ |
Works best with bolt-on turbine. |
| ・ |
Indispensable kit for converting NISSAN Z32 air flow meter.
(NISSAN Z32 air flow meter hasØ80 diameter of pipe while stock suction pipe has onlyØ65 diameter,
which becomes a large obstacle for air intake)
※This kit bolts on to the NISSAN Z32 air flow meter.
|
| ・ |
Gains engine response and output. Boosts acceleration. |
| ・ |
Looks good under the food. (Kit includes SAMCO® hose) |
|
|
|
| TOMEI SS suction pipe applies SAMCO® high strength hose and keeps its shape even at high boost
and high pressure, while stock suction pipe shrinks and chokes.
|
|
|
|
| |
Application |
Part No. |
Engine code |
Price(JPY) |
Note |
Kit contents |
| For Z32 air flow |
PS13* |
852003 |
SR20DET |
36,000 |
80Ø |
・Suction hose
・Turbine funnel |
| S14 |
852004 |
| S15 |
852005 |
| For D-jetronic |
PS13* |
852006 |
| S14 |
852007 |
| S15 |
852008 |
*Kit for PS13 will be delivered in mid November |
・Air flow
conversion
kit C |
 |
Best used with SS-suction kit
Part No.：251003
Price：13,400yen |
Kit contents |
・Funnel
・SAMCO® hose
・Clamp x 2
・Harness
・Air filter（HPI） |
|
|
| ■SS suction full KIT |
|
| This kit includes whole required parts from air filter to turbine flange for air flow-less intake system. |
|
| |
Part No. |
Engine code |
Price |
Note |
Kit contents |
 |
 |
| PS13* |
853001 |
SR20DET |
54,000yen |
80Ø |
・SS-suction kit
・Ø80 adaptor
・Air filter adaptor
・K&N Air filter ・Bracket |
| S14 |
853002 |
| S15 |
853003 |
*Kit for PS13 will be delivered in mid November |
|
|
2003/09/19 renewed
|
|
|
