| - |
 |
|
|
|
 |
|
|
|
Part No. |
QTY |
Part No. |
MSRP (USD) |
Contents |
|
|
1 |
981010 |
$12.00
|
NET:20g |
|
10 |
983001 |
$120.00
|
|
|
|
|
Designed to be applied on camshafts, pistons in the engines cylinder and working with any engine internal sliding components. The assembly process is the best time to start with the care of the internals to ensure the longevity of your engine internal components. This was designed in conjunction with Wako Chemical Company in Japan for the use in the assembly of standard and racing engine components.
From professional workshops to the privateers, now everyone can have access to the tools required to build a professional race engine. Packed in a small hard case that can be carried and easily stored in any toolbox to be used whenever needed.
|
|
|
|
|
|
|
|
|
|
 |
|
|
Part No. |
MSRP (USD) |
Ingredients |
Contents |
|
981017 |
$60.00
|
Molybdenum |
240g |
|
* Note: Temperature Range: 34.4°~398.9°C
* Max Pressure Resistance: 500,000psi (35153kgf/cm2) |
|
|
■ Provides Stability When Tightening Fasteners
The ARP Molybdenum grease is highly resistant against heat and pressure, enabling a accurate torque figure when tightening the fastener.?
■Recommended for Any Type of Threaded Bolt
The ARP Molybdenum grease is recommended on head bolts, crank cap bolts, connecting rod bolts, camshaft cap bolts, and every bolt as well as the nuts inside the engine assembly.
NOTE: This product is formulated to be used on fasteners/bolts only. Not recommended for use on rotating components. |
|
|
|
|
|
 |
|
|
Part No. |
MSRP (USD) |
Contents |
|
981016 |
$60.00
|
200g |
|
* JAN Code 4560147640249 |
TOMEI Bolt Smooth Paste is designed to be used on screws and bolts that are used with washers to prevent rust welds. Even after prolonged use this application will aid in easy removal of the screws/bolts from the washers. Effective for exhaust components, and other extreme heat and open weather applications. |
Normal rusted bolt. |
When applied to a washer |
Coated Thread |
|
|
|
|
|
 |
|
Lubrication & Sealing of the Throttle Butterfly
The TOMEI Throttle Coat will aid with the performance in smooth opening and closing of the butterfly which will increase throttle response. The lubrication properties will also aid by preventing the throttle from sticking and to eliminate rough idling and/or engine stalling. Improved sealing properties and efficient engine operations.
■ Application
* Improved Throttle Butterfly sealing to prevent engine stall.
* Can be used to prevent brake pad noise.（Only to be applied on the edges and not the contact surafce area.）
* Best used for parts where oil is not to be used on (this product does not contain any oil).
■Features
* Molybdenum Disulfide main ingredient.
* 10 micron layer per application.
* Easily applied the the supplied brush and air dried.
* Parts cleaner will not easily remove this coating either.
|
Part No. |
MSRP (USD) |
Amount |
|
981019 |
$50.00 |
150g |
|
|
| APPLICATION PROCEEDURE |
 |
● Shake can throughly prior to use.
（The molybdenum will tend to sink to the bottom and will need to be mixed well prior to use.）
●Stir with the brush supplied.
（Best to use a flat stick to achieve better mix results.）
●Once application is completed please allow 24 hours to dry. |
| EXAMPLES |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
