 |
|
| @ |
|
 |
|
| @ |
After Extensive testing,
we know this is the best!!
It is commonly
believed that performance efficiency can be improved by reducing
the secondary exhaust pressure from the turbine. The torque will
be affected when the pipes diameter is too wide.
We here at Tomei had invested over a year in researching all possible
aspects and combinations for the best performance gain throughout
the entire area. The end result was a decrease in exhaust resistance
in all areas and best results is achieved with our Outlet ( dump
pipe ) and front pipe as a combined set.
|
|
| Manufactured by Lost Wax Method for the Highest Quality. |
| @ |
| *Turbo Mount Bracket |
@ |
|
@ |
|
|
@ |
|
|
|
 |
|
| @ |
|
|
Front
Pipe |
 |
Σ70 enlarged pipe
|
|
SUS304 stainless steel |
|
Outlet (Dump
Pipe) with matching inner diameter and straight fitting flange. |
|
|
| @ |
 Increased
performance through |
| @ |
NOTES
|
| The Expreme 4G63 Outlet (Dump Pipe) with Front Pipe can only be used with the factory fitting. |
| ----Example---- |
| Genuine Outlet (Dump Pipe){Expreme
Front Pipe |
|
| Expreme
Outlet (Dump Pipe){Genuine Front Pipe |
|
|
| The Expreme Outlet which shows the performance upgrad with the use of the Dump Pipe combined. |
|
|
|
|
| @ |
OUTLET
COMPONENT
|
OUTLET
(Outlet (Dump Pipe)) |
{ |
FRONT PIPE
(Front Pipe) |
|
|
| @ |
|
EXPREME Outlet Component for 4G63 |
| Application |
Type |
Part Number |
| EVO IV-VI |
4G63 |
193092 |
| EVO VII-IX |
193093 |
|
|
Outlet (Dump Pipe) |
| MATERIAL |
Pipe Diameter
(Σ) |
Pipe Thickness
(mm) |
Weight
(k) |
| Pipe |
Flange |
| SUS304 |
Steel |
70
(Inner Diameter 65) |
2.5 |
1.75
(Normal 3.05) |
|
|
Front Pipe |
| Material |
Pipe Diameter
(Σ) |
Pipe Thickness
(mm) |
Weight
(k) |
| Pipe |
Flange |
| SUS304 |
Steel |
70
(Inner Diameter 65) |
2.0 |
(EVO IV-VI)3.8
(EVO VII-IX)3.9 |
|
| @ |
Contents
|
Outlet (Dump Pipe)/Front
Pipe/Gasket
|
|
| @ |
MSRP $630.00
USD
|
|
|
|
|
| @ |
 |
|
|
|
| @ |
