| Top
> 4AG
Complete Product Range |
 |
 |
 |
| ADJUSTABLE FUEL PRESSURE REGULATOR |
MANAGING PRESSURES!!
When upgrading your fuel system for more power you need to have this adjustable fuel pressure regulator to maximise the tuning potential and to get the most out of your engine. Available in 2 types and with fittings as well. |
|
|
|
 |
|
| TECHNICAL
TRAX 2 WAY LSD FOR AE86 |
Designed
for Punishment!
We
have the toughest LSD on the market in Japan. SO far
these have a 100% rate here and none have failed.
With the highest initial torque setting available
these are guaranteed to satisfy your needs. |
|
|
|
 |
|
| 4AG
FORGED PISTON KIT |
Your
Engines Beating Heart!
One
of the key elements in engine tuning.
We have applied our famous R&D engineering into
these high compression 4AG design Forged Pistons.
Our forged pistons have a long history of extended
reliability due to the design and manufacturing techniques
that we use in making these pistons. Proven
in real race environments and used in N2 race series
and D1GP in Japan at 10,000 RPM with proven reliability. |
|
|
|
 |
|
| 4AG
FORGED FULL COUNTER CRANKSHAFT |
Sensational
Response for High RPM!
Derived
from F1 technology and made from Chrome-moly EN40B!
Super light weight, superior strenght and made in
the same process and materials as crankshafts that
are used in F1GP engines. |
|
|
|
|
 |
 |
| 4AG
PONCAMS |
The
Essence Of Our Existence!
Our
Poncam camshafts are designed as a "drop in application!",
No dailing in required as the nock-pin has been pre-set
so that the timing it set for you. No valve spring
upgrades needed and is the cheapest and best upgade
for street and track use. Will work on the OEM ECU
settings and aftermarket ECU if you want more customised
settings. |
|
|
|
|
 |
| 4AG
PROCAMS |
The
Essence Of Japans
Professionals!
The PROCAM series are for the serious users who need
results when every milli-seconds count. These will
deliver the added power and made for increased performance
from mid to high end RPM. Not for the faint hearted
and will require professional setup and installation.
Available in
3 sizes! |
|
|
|
 |
 |
| 4AG
TIMING BELT |
Made
from the Highest Grade Materials!
Back to basics in engine tuning. This simple affordable
upgrade is required to keep your valve timing in place
and to avoid engine failure or from loosing the tuned
settings you have spent time and money for. |
|
|
|
|
 |
 |
| 4AG
EXHAUST MANIFOLD GASKET |
Metal Exhuast Gasket!
Stainless steel bead structure design, absolute high
surface pressure seal and no exhaust leak. Suitable
for large ports with inner diameter φ38mm! And Re-usable! |
|
|
|
 |
|
| 4AG
REINFORCED MAIN STUDS |
Keep
Your Crank In Place!
In harsh times and conditions the stress can be too
much to handle. At higher RPMs and Boost applications
you want to keep your crank in place. Ensure that
you have the adequate safety mesures in place for
that added support. |
|
|
|
 |
|
| 4AG
REINFORCED MAIN STUDS & STUD LADDER SET |
Keep
Your Crank In Place!
In harsh times and conditions the stress can be too
much to handle. At higher RPMs and Boost applications
you want to keep your crank in place. Ensure that
you have the adequate safety mesures in place for
that added support. |
|
|
|
|
 |
|
| 4AG
REINFORCED STUD LADDERS |
Added
Support!
An essential part for 4AG engines that are
used for hard driving from users who love the high
end RPM! This is best used with our Main Studs for
added strength and support. |
|
|
|
 |
 |
| 4AG
FLYWHEEL BOLTS |
DESIGNED
FOR EXTREME CONDITIONS!!
The OEM bolts are not designed to cope with
the high loads and stresses involved with aftermarket
clutch/flywheel kits and for high end RPM use. These
bolts will prevent engine damage and will hold your
flywheel in place when you need it most. |
|
|
|
| |
|
|
| |
|
|
| |
